Branson 3520h

The easy to use hydrostatic transmission gives speed and direction change quickly without shifting or clutching. Forward and reverse are simple when using loader.

ENGINE

Model A1700N2
Type Vertical, 4 Cycle, Water Cooled
Fuel Type Diesel
Combustion System Swirl Chamber
Aspiration Naturally
Engine Output 35hp @ 2600rpm
Number of Cylinders 3
Bore x Stroke (mm) 84 x 94
Compression Ratio 21:3:2
Fuel Consumption NA
Type of Air Cleaner Dry, Double Filter Element
Battery 12V
Displacement (cc) 2286
Fuel Tank Capacity 12 gal
Pre-heating system Glow plug

POWER TRAIN

Transmission Type Hydrostatic
Main Shifting Hydrostatic
Reverse Method Synchroshuttle
Gear Shifting (Front x Rear) Hydrostatic
Brakes Wet Disc
Steering Hydrostatic Power Steering
Clutch Dry, Single

HYDRAULIC SYSTEM

Type Position
3 Point Hitch Category 1
Lift Capacity 3306 lbs.
Pump Flow Main 8.9 gpm / Steering 4.8 gpm

PTO

PTO Power 29hp @ 2600rpm
Rear PTO Type Independent PTO (6 Spline shaft)
Rear PTO speeds 540 / 790 rpm

DIMENSIONS

Drive System 4 wheel-drive
Overall Length 130 inches
Overall Width 64-72 inches
Overall Height 98 inches with ROPS
Wheelbase 70.9 inches
Front Tread 50.5 inches
Rear Tread 43.6-60 inches
Ground Clearance 12.7 inches
Weight 4053 lbs

MISCELLANEOUS

Optional Equipment Canopy Rear Remotes Block Heater

 

TIRES

Tires Options Agriculture, Industrial, and Turf
Hydrostatic Transmission

BL25R for 20 Series

Specifications
Maximum Lift Height 103.8 in
Clearance with Attachment Level 97.3 in
Clearance with Attachment Dumped 79.0 in
Reach at Maximum Height 26.0 in
Reach with Attachment on Ground 67.3 in
Maximum Dump Angle 44 degrees
Attachment Rollback Angle 24.5 degrees
Digging Depth Below Grade 1.9 in
Overall Height in Carry Position 47.7 in
Depth of Attachment (to back of inner shelf) 23.7 in
Height of Attachment 22.1 in
Depth of Attachment (to pivot pin) 29.1 in
Lift Capacity to Full Height 2100 lbs
Breakout Force 3531 lbs
Relief Valve Setting (loader control valve) 2489 psi
Lift Cylinders 2.1 x 17.9 in
Bucket Cylinder 1.9 x 15.4 in
Bucket Specification 67 in